The CN series with aluminum housings (85-230Vac only) offer up to two active rods and one reference rod to control the level of all conductive mediums.  The built-in electronics of the CN Series also offers adjustable sensitivity and time delay adjustment. Because the electronics/relay is mounted within the housing, the use of a remote controller is not necessary.

Models are available with either rigid rods, removable rods or pendular electrodes. For applications with heavy vapor, aggressive media or a product that tends to stick to or accumulate on the rods, Sitron recommends that the rods should be Halar coated.

CN - Condutive Level Probe

Application: Level Detection inLiquids
Power Supply: 24Vdc (+/- 10%) / 85...230Vac / 125Vdc
Consumption: 2VA
Output: Relay (SPDT) 5A-250Vac
Ajustment: Sensibility: max 50K ohms
Time Delay: 0.1 to 5 sec.
Enclosure Material: Aluminum
Electrical Connection: Cable Gland ½” BSP, NPT or M12 connector
Process Connection: 1/2” to 1 ½” BSP or NPT, Flange and Sanitary
Wetted Parts: 316 SS
Operating Temperature: -10 to +80ºC
Max. Pressure: 20 Bar
Class Protection: IP65
  • High level alarm
  • Low level alarm
  • Pump protection
  • Leak detection
  • Overflow alarm
  • Supply line control
  • Fill/Drain control
  • Cooling water monitoring
  • On/Off valve monitoring

No video is available at this time for this item.

Web chat via WhatsApp
Web chat via WhatsApp