Português
 
 This website is best
viewed with: MS
Internet Explorer 5.0
upwards
Adobe Acrobat
Reader 4.05
 
 
 
 

Conductive Level Switches
 
 
MODELS:
CONTROLLERS:

INTRODUCTION:

Sitronīs line of Conductive Level Switches offer a wide range of customized options to meet any application's need. CL models are designed to control the level of all conductive mediums with up to 5 different points of level detection. Models are available with Fixed rigid rods, Removable rigid rods, or with Pendular electrodes attached to the housing with cables. Applications involve both alarm point level detection as well as on/off pump valve control. Like all of Sitron's products, the series of Conductive Level Switches feature easy installation and maintenance free reliability.


TECHNOLOGY:

The probes work through the variation of the electrical resistance between the reference electrode and the level control electrode. Conductive Level Switches detect the level resistance when their electrodes are covered by the medium. An electrically conductive tank wall may be used as the reference electrode. If the tank is made of plastic, concrete or any other non-conductive material, an additional electrode is required to act as a reference.


MODELS:
 

Sitron has several types of conductive switches:

  • The CLF-(1 up to 5) has fixed rods and is available with up to five points of level detection and control.
  • The CLR-(1 up to 5) has removable rods designed for easy handling and installation and is also available with up to five points of level detection and control.
  • The CLP-(1 up to 5) has pendular electrodes designed for deep well or tank applications and is also available with up to five points of level detection and control.
  • The CLE is a single pendular electrode without the enclosure or the process connection.

These models are all used along with an external controller.

However, there are two other types of conductive probes that do not require an external controller. The CL1-DC and CL2-DC have self-contained controllers built into the head. These models are available for single or high and low point level detection.


FEATURES:
  • Easy to install and to operate
  • Rugged construction
  • Low Cost
  • Built-in units (probe and controller)
  • Renovable rods
  • Up to five points of level control (or more upon request)
  • Rods can be coated when necessary
  • Available with 3l6 S.S. sanitary, flange or threaded connections
  • approved
 

 
PDF Download
 
  
Catalog Manual Data Sheet
CONDUCTIVECONDUCTIVECONDUCTIVE LEVEL
2,608 KB 2,15 KB 1,576 KB
 

 
Sitron Usa, Inc.
21 W. Nicholai St.
Hicksville, NY 11801
PH: 516-935-8001 / FX: 516-935-6001
e-mail: info@sitron.com
 
  
 
Flow Switches
Flow Transmitters
 
Conductive
Capacitive
 
Vibrating
Tuning Fork
 
  Capacitive
 
 
Pressure
Transmitters
 
 
Submersible
Pressure
Transmitters